Commercial Fire Restoration in TUJUNGA, California

Soot, smoke and structure handled so your doors reopen

Commercial Fire Restoration in TUJUNGA, California is the work of getting a fire-damaged business back to operating condition, and it starts with a phone call. We handle business fire damage restoration in TUJUNGA for storefronts, offices, restaurants and multi-unit buildings, from emergency board-up through smoke odor removal and structural repair. Every hour a building sits wet and sooty, the damage deepens.

Classic fire trucks parked outside a Minsk restaurant, showcasing vintage Soviet-era vehicles.

What Commercial Fire Restoration in TUJUNGA, California Involves

Commercial Fire Restoration in TUJUNGA, California is the full-scope recovery of a business property after a fire: emergency stabilization, soot and smoke removal, water extraction from firefighting, odor neutralization, and structural repair back to code. It is not a cleaning job. Soot is acidic and etches metal, glass and finished surfaces within days, and the pressurized water used to knock down a fire soaks into drywall, insulation and subfloor before anyone sees it.

Local businesses call us for the same handful of scenarios. A kitchen grease fire in a Tujunga Village restaurant leaves a sticky residue across the entire dining room. An electrical fire in a Verdugo Hills office fills the HVAC system with smoke contamination. A wildfire ember intrusion event along Tujunga Canyon pushes ash through roof vents and windows. If you are searching for commercial fire restoration near me in TUJUNGA California while the fire department is still on scene, call (833) 929-6186 and we will start the intake.

Why Business Owners Call Us First

Why Business Owners Call Us First

A fire costs you twice: once in damage, once in the days your business cannot open. Our job is to shrink both numbers with fast stabilization, documented scope, and repair work that passes inspection the first time.

Faster Reopening Timeline

Most commercial losses we handle reach a partial reopen in 5 to 14 days when the structure is sound. We sequence demolition, drying and rebuild so trades are not waiting on each other, and we tell you which areas can safely reopen early while the back of the building is still being worked.

Odor That Actually Leaves

Smoke odor lingering after fire is the complaint we hear most, and it is usually a duct problem. We run HEPA air scrubbers and negative air machines during work, then treat the HVAC system and soft goods with a thermal fogger and hydroxyl generator media so the smell does not return when the weather warms up.

Insurance Documentation Done Right

We photograph and moisture-map every affected room, log readings with a moisture meter and thermal imaging camera, and hand your adjuster a scope that matches the visible damage. Cleaner documentation is the single biggest reason a business fire damage restoration TUJUNGA claim moves instead of stalling.

One Crew, One Point of Contact

Emergency board-up, water extraction, soot removal, drywall and roofing all run through the same project lead. You get one phone number and one schedule instead of juggling a restoration company, a roofer and a drywall sub who never talk to each other.

How Our Commercial Fire Restoration Process Works

Every job follows the same five stages. Timelines shift with building size and how much water the fire department used, but the order never changes, and you get a written schedule after the first walkthrough.

1

Emergency Response

We answer 24/7 and roll to the address with board-up materials, extraction equipment and air scrubbers. The first hour is about stopping further damage: securing openings, shutting off compromised utilities, and getting standing water out of the building before it reaches the subfloor. Expect a call-back within 30 minutes and an on-site arrival window confirmed by phone.

2

Assessment and Scope

A project lead walks the property with a thermal imaging camera and moisture meter, mapping char, smoke residue and hidden water in walls and ceilings. We photograph everything for your insurer and separate what can be cleaned from what has to be removed. This walkthrough usually takes 60 to 90 minutes on a mid-size commercial building.

3

Water Extraction and Drying

Firefighting water is the damage most owners underestimate. We extract standing water, pull wet insulation and drywall where needed, then set air movers and dehumidifiers. Drying a commercial space typically runs 3 to 5 days, tracked daily against the ANSI/IICRC S500 standard so we know when the structure is actually dry, not just dry to the touch.

4

Soot, Smoke and Odor Removal

Crews work top-down with chemical sponges and soot sponges on walls and ceilings, HEPA vacuums on porous surfaces, and wire brushes on framing where char is surface-level. Ductwork and HVAC components get cleaned or replaced, then we seal remaining odor with thermal fogging and run ozone treatment or hydroxyl generators in unoccupied areas until the air tests clean.

5

Repair and Reopen

We rebuild what the fire took: drywall, lumber, insulation, roofing shingles, paint and smoke sealant, finished to California Building Code. Before we hand back keys, we walk the space with you room by room, confirm the work list is closed, and leave you the documentation package for your insurer and your landlord.

Fire and Smoke Restoration Expertise You Can Verify

We have been restoring fire-damaged properties in the Sunland-Tujunga area since 2023, and our technicians hold IICRC credentials specific to this work rather than general handyman experience. That means fire and smoke restoration technicians trained to read char patterns, odor control technicians who understand why smoke comes back, and water damage technicians who know that the fire is only half the loss. We work to ANSI/IICRC S520 for mold and ANSI/IICRC S500 for water, follow NFPA 921 language when documenting fire origin for insurers, and hold a California Contractors State License Board license for the rebuild side. Every crew member is OSHA 10-Hour Construction Safety trained and our firm is EPA Lead-Safe Certified, which matters in older Tujunga housing stock.

  • IICRC Fire and Smoke Restoration Technician (FSRT) certified crews on every commercial loss
  • IICRC Odor Control Technician (OCT) training applied to HVAC and soft-goods deodorization
  • IICRC Water Damage Restoration Technician (WRT) and Applied Structural Drying (ASD) credentials for firefighting water
  • California Contractors State License Board licensed for structural repair after fire
  • EPA Lead-Safe Certified Firm and OSHA 10-Hour trained for work in pre-1978 buildings
Fire and Smoke Restoration Expertise You Can Verify

Why TUJUNGA Businesses Choose Our Commercial Fire Restoration

Fire damage rewards speed and punishes guesswork. We built our process around both: answer the phone at any hour, stabilize the building the same day, and document every decision so your claim and your rebuild stay on schedule.

Answering the Phone at 3 AM

Fires do not wait for business hours, so our line does not either. Call (833) 929-6186 at any hour and reach a person who can dispatch a crew, not a voicemail box. For emergency commercial fire restoration TUJUNGA business owners get a confirmed arrival window on that first call.

Documentation Your Adjuster Accepts

We photograph, moisture-map and log every affected area before demolition starts. Adjusters get a scope tied to real readings from a moisture meter and thermal imaging camera, which shortens approval cycles and reduces the back-and-forth that stalls a rebuild for weeks.

Certified Odor and Air Work

Smoke contamination lives in ductwork, insulation and upholstery long after visible soot is gone. Our commercial fire and smoke restoration TUJUNGA California crews clean or replace HVAC components, then use thermal fogging solution, activated carbon filters and hydroxyl generator media to finish the job instead of masking it.

Local Building Knowledge

We know how hillside properties in McGroarty and Haines Canyon behave after a fire, how wildfire ember intrusion differs from an interior electrical fire, and what inspectors in this area look for on a final walkthrough. That familiarity keeps the repair phase moving.

What Our Commercial Fire Restoration Includes

Our standard commercial scope covers emergency stabilization through finished repair, with documentation for your insurer at every stage. Anything outside the fire loss itself, like pre-existing code upgrades or tenant-owned equipment, we flag in writing before work starts so there are no surprises on the invoice.

What's Included

Emergency Board-Up and Securing

We secure broken windows, doors and roof openings the same day, shut off compromised utilities, and post the property so it is not left open overnight. This is the step that prevents theft, weather damage and further loss while your claim is being processed.

Water Extraction and Structural Drying

Standing water comes out with extraction equipment, then air movers and dehumidifiers dry the structure over 3 to 5 days. We track readings daily against ANSI/IICRC S500 so the rebuild starts on a genuinely dry building, not one that just feels dry.

Soot and Smoke Residue Removal

Walls, ceilings, framing and fixtures are cleaned with chemical sponges, HEPA vacuums and dry ice blasting equipment where abrasive methods would damage the surface. Ductwork and HVAC components are cleaned or replaced so smoke contamination does not recirculate after you reopen.

Odor Neutralization and Air Treatment

We treat the source with thermal fogging solution and encapsulant sealer, then run ozone treatment or hydroxyl generators in unoccupied areas and filter the air with activated carbon filters. Treatment continues until the space tests clean, not until the smell fades.

Structural Repair and Rebuild

Drywall, lumber, insulation, roofing shingles, paint and trim are rebuilt to California Building Code, with permits pulled where required. We schedule trades so the rebuild does not stall, and we walk the finished space with you before we close the job.

Insurance Documentation Package

You get photographs, moisture maps, thermal imaging records and a line-item scope formatted for your adjuster. Clean documentation is what keeps a claim moving, and it is included in every commercial job we take on.

Problems We Solve for TUJUNGA Businesses After a Fire

Most of the damage we fix was not caused by the flames. It came from water, smoke and delay. Here are the problems we see most often and what happens when they are left alone.

Problem

Smoke odor that returns weeks after cleanup

Customers walk in, smell burned air and leave. Staff complain, reviews drop, and the building gets a reputation that outlasts the repair.

Solution

We treat the source instead of the air: HVAC cleaning, shellac primer on porous framing, thermal fogging and hydroxyl treatment run until readings are clean. Our IICRC Odor Control Technician training exists for exactly this problem, and it is why the smell does not come back when the weather warms.

Problem

Hidden water damage from firefighting efforts

Water sits inside wall cavities and under subfloor, and within 48 to 72 hours mold begins to colonize. What was a fire claim becomes a fire-plus-mold claim with a longer timeline.

Solution

We extract standing water immediately, map moisture with a thermal imaging camera and moisture meter, and dry to ANSI/IICRC S500 standards. Drying typically takes 3 to 5 days and we track it daily so the rebuild starts on a dry structure.

Problem

Soot residue etching metal, glass and fixtures

Acidic soot permanently damages chrome, aluminum, glass and finished surfaces within days. Fixtures that could have been cleaned have to be replaced instead.

Solution

Crews begin soot removal as soon as the building is safe, using chemical sponges and soot sponges on delicate surfaces and dry ice blasting equipment on framing. Early removal is what saves fixtures and keeps replacement costs out of your claim.

Problem

A claim that stalls because documentation is thin

Adjusters cannot approve what they cannot see. Incomplete photos and missing moisture readings turn a two-week approval into a two-month argument while the building sits.

Solution

Every job includes a documentation package: photographs, moisture maps, thermal imaging records and a line-item scope. We build it as we work, so your adjuster has what they need on the first submission rather than the third.

When TUJUNGA Businesses Call Us

1

A restaurant kitchen fire sends grease smoke through the dining room and ductwork overnight.

Solution:

We board up, extract suppression water, degrease every surface in the kitchen, clean the hood and duct system, and treat the dining room for odor. Front-of-house cleaning runs in parallel with back-of-house repair so the two finish together.

Outcome:

Most restaurants in this situation reopen a limited menu within 7 to 10 days, with full service restored once the kitchen rebuild is signed off.

2

An electrical fire in an office damages a server room and contaminates the HVAC system.

Solution:

We confirm the circuit is safe, remove charred debris, clean or replace ductwork and air handlers, and run HEPA air scrubbers and negative air machines through the affected suites. Ceiling tiles and insulation are replaced where smoke settled.

Outcome:

Staff typically return to unaffected suites within a week, and the full floor is back in service once air quality is confirmed clean.

3

A wildfire ember intrusion event pushes ash and smoke through roof vents on a hillside property.

Solution:

We inspect the attic and roof assembly with thermal imaging, remove contaminated insulation, clean framing and decking, and seal the roof assembly before replacing shingles and vents. Interior cleaning follows the same smoke path the ash took.

Outcome:

The building is sealed against the next ember event and the interior air is clean, which matters most for properties along Tujunga Canyon and Mount Gleason.

4

A multi-unit building has one burned apartment and three smoke-affected neighbors.

Solution:

We work unit by unit, documenting landlord versus tenant property, cleaning adjacent units first so occupied tenants can stay, and treating odor in the shared corridors and stairwells.

Outcome:

Neighboring tenants usually stay in place, and the burned unit is rebuilt once the claim is scoped and permits are pulled.

Tools and Methods We Use on Every Job

Tools & Equipment

Thermal imaging camera

Finds hidden hot spots, char behind finished surfaces, and water trapped in wall cavities that a visual inspection would miss entirely.

Moisture meter

Tracks drying progress daily against ANSI/IICRC S500 targets so we know when the structure is genuinely dry and ready for rebuild.

HEPA air scrubber and negative air machine

Filters smoke particles out of the air and keeps contaminated air from spreading into clean areas of the building during demolition and cleaning.

Air mover and dehumidifier

Dri-Daz and Phoenix Restoration Equipment units move air through wet cavities and pull moisture out of the structure over the 3 to 5 day drying window.

Thermal fogger and ozone generator

Thermal fogging solution reaches cavities and soft goods that wiping cannot, and ozone treatment neutralizes odor in unoccupied spaces after cleaning is complete.

Dry ice blasting equipment

Removes char and smoke residue from framing and masonry without the abrasion or water damage that wire brushing and pressure washing cause.

Chemical sponge and soot sponge

Lifts loose soot from walls, ceilings and delicate surfaces before wet cleaning, which prevents residue from being smeared deeper into the finish.

Methods

ANSI/IICRC S500 water drying protocol

Firefighting water is dried to a documented standard with daily readings, so the rebuild does not begin over a damp structure. This is the step that prevents mold growth after fire and water damage from becoming a second claim.

ANSI/IICRC S520 mold-aware remediation

Where water sat long enough for mold to start, containment and filtration follow S520 practice so spores are not spread into unaffected areas during demolition and cleaning.

NFPA 921 fire documentation

We document char patterns and fire spread in language consistent with NFPA 921 so your adjuster and, if needed, your attorney have a clear record of what happened and what was damaged.

California Building Code rebuild

Structural repair after fire is rebuilt to CBC requirements with permits pulled where the scope requires them, so the finished space passes inspection and your occupancy is not held up.

How Commercial Fire Restoration Runs in TUJUNGA

Tujunga is a hillside community, and that shapes how fire damage plays out here. Properties along Tujunga Canyon and up toward Mount Gleason face wildfire ember intrusion risk that inland businesses do not, which means roof assemblies, vents and attic insulation get inspected on almost every job we take. Older commercial buildings in Downtown Tujunga and Tujunga Village often have original wiring and plaster walls, so electrical fire damage and kitchen grease fire damage are common calls, and plaster holds smoke odor longer than modern drywall. The dry Santa Ana wind pattern in fall and winter also drives fires fast, which is why our emergency commercial fire restoration TUJUNGA response is built around same-day stabilization rather than next-day scheduling. If you are looking for affordable commercial fire restoration TUJUNGA California businesses can budget for, the honest answer is that early intervention is what keeps the number down: a building stabilized in the first 24 hours avoids the mold remediation and full drywall replacement that doubles a scope. We work to Cal/OSHA safety standards on every site and pull permits through the local building department when structural repair requires it.

Service Areas

Downtown Tujunga

Older storefronts with original wiring and shared walls, where an electrical fire in one unit can push smoke into the neighboring business through a common attic.

Tujunga Village

Restaurant and retail density means kitchen grease fire damage and ductwork smoke contamination are the most frequent calls we get here.

Verdugo Hills

Office and light commercial buildings with central HVAC systems, where smoke contamination spreads through ductwork faster than through the rooms themselves.

Tujunga Canyon

Hillside properties exposed to wildfire ember intrusion, so roof assemblies, vents and attic insulation are inspected on nearly every job.

McGroarty and Haines Canyon

Residential properties converted to business use, where attic fire damage and older framing require careful documentation for insurance.

Local Considerations

Dry fall and winter Santa Ana winds

Fires spread faster and embers travel farther, so hillside properties need roof and vent inspection even when the interior looks untouched.

Aging commercial wiring in older buildings

Electrical fire damage is more common, and restoration has to coordinate with an electrician so the cause is corrected before rebuild begins.

Plaster walls in pre-1978 buildings

Plaster holds smoke odor longer than drywall and requires sealing with shellac primer rather than simple cleaning, which adds a step to odor treatment.

Hillside access and narrow driveways

Equipment staging takes planning on canyon roads, so we confirm access and parking before the crew arrives rather than losing time on scene.

Restaurant Kitchen Fire, Tujunga Village

Before

A grease fire started on a line cook's station and spread through the hood system, sending smoke across a 1,400 square foot dining room. Suppression water pooled under the kitchen floor tile, and the ductwork was coated in grease residue and soot.

After

We extracted the water, dried the subfloor over four days, degreased and cleaned the hood and duct system, replaced ceiling tiles and treated the dining room with thermal fogging. The restaurant reopened a limited menu on day nine and full service on day sixteen.

Maintenance & Follow-up

Quarterly hood and duct cleaning plus a kitchen suppression inspection keeps grease from building back to a level that will carry a fire.

Before

An electrical fault in a server room burned a wall cavity and pushed smoke through the HVAC system into six offices. Soot settled on ceiling tiles, desks and equipment, and the air handler was contaminated.

After

We cleaned and sealed the ductwork, replaced the air handler filters and contaminated ceiling tiles, ran HEPA air scrubbers for four days, and rebuilt the damaged wall. Staff returned to four of the six offices within a week and the full floor within three.

Maintenance & Follow-up

An annual electrical panel inspection and regular HVAC filter changes reduce the chance of a repeat and keep the ductwork clean.

Before

A bedroom fire in one unit of a four-plex damaged the room and sent smoke through shared corridors and into three neighboring units. Suppression water soaked the common stairwell wall.

After

We worked unit by unit, cleaned and treated the three neighboring units in three days so tenants could stay, dried the stairwell wall, and rebuilt the burned bedroom to code. Documentation separated landlord and tenant property for both insurers.

Maintenance & Follow-up

Working smoke alarms in every bedroom and a shared hallway detector check twice a year are the cheapest protection a multi-unit owner has.

What Commercial Fire Restoration Costs in TUJUNGA

Typical 2026 pricing in this area runs $8,000 to $60,000 for commercial fire restoration, with small office or retail losses near the low end and full kitchen or multi-unit rebuilds at the top. The number is driven by square footage, how much water the fire department used, whether the roof or framing is involved, and how much ductwork has to be replaced. We walk the property, photograph the damage and give you a written scope before work starts, so you are comparing a real number to your policy rather than a phone estimate.

Pricing Factors

Square footage affected

Larger commercial spaces mean more surface cleaning, more demolition and more material. A 1,000 square foot office and a 6,000 square foot retail floor are different jobs even when the fire damage looks similar.

Water volume from suppression

Heavy water use means extraction, cavity drying and sometimes drywall removal. Drying adds 3 to 5 days and equipment rental to the scope, which is often the largest variable in the estimate.

Structural involvement

Roof framing, load-bearing walls and subfloor repair require permits and inspection, which adds cost and time. Cosmetic damage is faster and cheaper to close out.

HVAC and ductwork contamination

Smoke travels through ductwork into rooms the fire never reached. Cleaning or replacing air handlers, filters and duct runs adds scope but is what prevents odor from returning after reopen.

Contents and inventory

Furniture, fixtures and inventory that can be cleaned and restored stay in service and cost less than replacement. Items that must be discarded add to the removal and disposal line.

Access and building age

Hillside properties with narrow driveways and pre-1978 buildings with plaster walls and lead paint considerations take more labor and planning, which shows up in the final number.

Investment Range

$8,000 - $60,000 depending on scope

Based on project scope

Value You Get

The cheapest restoration is the one that starts in the first 24 hours. Fast stabilization prevents mold, saves fixtures from soot etching, and keeps your claim from growing while the building sits.

Frequently Asked Questions About Commercial Fire Restoration

Have questions? We have answers.

Call Us
How much does commercial fire restoration cost in TUJUNGA California?

Most commercial fire restoration projects in this area run $8,000 to $60,000, with small office or retail losses at the low end and full kitchen or multi-unit rebuilds at the top. Square footage, how much water the fire department used, whether the roof or framing is involved, and how much ductwork needs replacement drive the number. We walk the property, photograph the damage and give you a written scope before any work begins.

Who does business fire damage restoration near me in TUJUNGA?

We do, and we cover the whole Sunland-Tujunga area including Downtown Tujunga, Tujunga Village, Verdugo Hills and Tujunga Canyon. Call (833) 929-6186 and we will confirm an arrival window on the spot. We handle board-up, water extraction, soot and smoke removal, odor treatment and the structural rebuild, so you are not coordinating three separate contractors while your business is closed.

How long does commercial fire restoration take in TUJUNGA?

Plan on 2 to 6 weeks for most commercial losses, with a partial reopen often possible in 5 to 14 days if the front of the building is unaffected. Drying alone takes 3 to 5 days, odor treatment adds 1 to 3 days, and rebuild time depends on permit turnaround and material availability. We give you a written schedule after the first walkthrough and update it as the scope firms up.

Does insurance cover commercial fire restoration in TUJUNGA California?

Yes, most commercial property policies cover fire damage restoration including water damage from firefighting, smoke remediation and code-required rebuild work, up to your policy limits and subject to your deductible. We document the loss with photographs, moisture readings and a line-item scope formatted for adjusters. Call us before you sign anything from a contractor your insurer recommends so the scope reflects the actual damage.

Credentials and Reviews

Certifications

IICRC Fire and Smoke Restoration Technician (FSRT) by IICRC
IICRC Odor Control Technician (OCT) by IICRC
IICRC Water Damage Restoration Technician (WRT) and Applied Structural Drying (ASD) by IICRC
California Contractors State License Board licensed contractor by California Contractors State License Board
EPA Lead-Safe Certified Firm by U.S. Environmental Protection Agency

Reviews

Google

They answered at 11 PM after our kitchen fire and had a crew boarding up the back door within the hour. Daily moisture readings, clean ductwork, and a scope our adjuster approved without changes. We were serving a limited menu in nine days.

Yelp

Our office HVAC was full of smoke after an electrical fire. They cleaned and sealed the ducts, replaced the ceiling tiles, and ran scrubbers until the air was actually clean. Staff were back at their desks in the unaffected suites the next Monday.

BBB

Property manager here. They worked unit by unit so our tenants could stay, and the documentation separated building property from tenant property cleanly. Both insurers accepted it first time. I have called them twice since.

Related Services

Smoke Damage Restoration

Smoke travels farther than flame, and our smoke damage restoration work covers walls, ceilings, ductwork and contents in rooms the fire never reached. It is the step that decides whether your staff and customers walk into a clean space or a building that still smells burned.

Smoke Damage Restoration

Fire Damage Clean Up

Fire damage clean up handles the debris, char and contaminated materials that have to leave the building before restoration can start. On commercial jobs we stage removal to keep a loading dock or side entrance usable so your business can keep partial operations running.

Fire Damage Clean Up

Emergency Fire Damage Restoration

Emergency fire damage restoration is the first-hours response: board-up, utility shutoff, water extraction and air scrubbing. Getting this right in the first 24 hours is what keeps a contained fire from becoming a mold and structural problem three weeks later.

Emergency Fire Damage Restoration

Structural Repair After Fire

Structural repair after fire covers framing, roof decking, drywall, insulation and finishes, rebuilt to California Building Code. We handle the permit path and the inspection sequence so the rebuild does not stall waiting on paperwork while your space sits empty.

Structural Repair After Fire

Odor Removal After Fire

Odor removal after fire is its own discipline. We treat the source rather than the air, cleaning HVAC components, sealing porous framing with shellac primer and running thermal fogging and hydroxyl treatment until the smell is gone, not covered up.

Odor Removal After Fire

Soot Removal

Soot removal has to happen before anything gets wet again, because acidic residue etches metal fixtures, glass and finished surfaces within days. Crews use chemical sponges, HEPA vacuums and dry ice blasting equipment on framing where abrasive methods would cause more harm than good.

Soot Removal

Smoke Remediation

Smoke remediation addresses the residue you cannot see: particles settled inside wall cavities, above drop ceilings and in the air handler. We combine HEPA filtration, negative air pressure and surface cleaning so the indoor air is safe before employees return to the building.

Smoke Remediation

Fire and Flood Restoration

Fire and flood restoration handles the combined loss when suppression water soaks a building the fire already damaged. Drying has to happen alongside soot removal, and we sequence both so wet drywall does not sit long enough to grow mold behind new paint.

Fire and Flood Restoration

24 hour Fire Restoration

24 hour fire restoration means we answer at any hour and dispatch a crew the same night. For a restaurant with refrigeration full of product or a retail space with a broken storefront, the difference between a same-night response and a next-morning one is measured in dollars.

24 hour Fire Restoration

Fire Damage Restoration Near Me

If you are searching fire damage restoration near me in the Tujunga area, we cover Downtown Tujunga, Sunland-Tujunga, Tujunga Canyon, Verdugo Hills, McGroarty, Haines Canyon, Mount Gleason, Plainview, Sunhill and Tujunga Village with the same crew and the same response standard.

Fire Damage Restoration Near Me

Attic Fire Restoration

Attic fire restoration is common in older Tujunga homes and small commercial buildings where wiring and insulation meet. Attic fires smolder in insulation and char roof framing, so we inspect with thermal imaging before declaring the space clear and rebuild decking and shingles to code.

Attic Fire Restoration

Kitchen Fire Cleanup

Kitchen fire cleanup deals with grease fire residue, which behaves differently from ordinary smoke and coats every surface in the room. We degrease, clean ductwork and hood systems, and treat the dining or retail space beyond the kitchen so the whole building is usable again.

Kitchen Fire Cleanup

Electrical Fire Cleanup

Electrical fire cleanup starts with confirming the circuit is safe and the cause is corrected before restoration begins. We remove charred wiring debris, clean smoke residue from panels and equipment, and coordinate with your electrician so the rebuild passes inspection.

Electrical Fire Cleanup

Hoarding Cleanup After Fire

Hoarding cleanup after fire is slower, more careful work because contents are dense and access is limited. We sort, document and remove debris in stages, then clean the structure underneath so smoke residue trapped behind stored items does not resurface later.

Hoarding Cleanup After Fire

Tenant Fire Damage Cleanup

Tenant fire damage cleanup handles the split responsibility between landlord and renter, documenting what belongs to the building and what belongs to the tenant. Clear documentation keeps the claim from turning into a dispute between two policies.

Tenant Fire Damage Cleanup

Apartment Fire Cleanup

Apartment fire cleanup covers the unit that burned and the neighboring units affected by smoke and water. We work unit by unit so occupied tenants can return as soon as their space is clean, rather than waiting for the whole building.

Apartment Fire Cleanup

Fire-Damaged Furniture Restoration

Fire-damaged furniture restoration saves pieces that look unsalvageable: wood frames cleaned and refinished, upholstery treated for smoke odor, metal fixtures polished. Keeping furniture in service is often cheaper than replacing it and helps your claim close faster.

Fire-Damaged Furniture Restoration

Fire and Smoke Damage Restoration

Fire and smoke damage restoration combines structural repair with air and surface decontamination in one scope. Doing both under one project lead means the rebuild does not begin until the air is clean, so new finishes are not contaminated the day they go in.

Fire and Smoke Damage Restoration

Bedroom Fire Damage Cleanup

Bedroom fire damage cleanup focuses on the rooms where smoke residue settles into soft goods, mattresses and closets. We treat fabrics, clean walls and ceilings, and confirm air quality before the room is used again, which matters most in rental and multi-unit properties.

Bedroom Fire Damage Cleanup

Get Commercial Fire Restoration in TUJUNGA, California Started Now

Every hour counts after a fire, and the first call is the one that matters. We answer 24/7, confirm an arrival window on the phone, and start stabilization the same day. Call (833) 929-6186 and we will walk the damage with you.